DL2/DL3/DL3FE (EOL)
The default password for the DL Enterprise (DL2, DLE) is "000000", six zeros. The default password for the DL3 and DL3FE with a firmware versi...
Fri, 3 Feb, 2023 at 3:05 PM
You need to download and run the Master Password Utility using this link Once you have downloaded this application: Run the downloaded software as an adm...
Wed, 22 Feb, 2023 at 3:42 PM
The DL3 allows the administrator to enforce strong password rules for authentication. With the Strong Password feature enabled, all passwords must meet the ...
Tue, 28 Feb, 2023 at 2:19 PM
The DataLocker Configurator is a tool that allows an administrator to rapidly configure and deploy DL3 units for an organization. Create and save security ...
Fri, 3 Feb, 2023 at 3:06 PM
The default password for the DL Enterprise (DL2, DLE) is "000000", six zeros. The default password for the DL3 and DL3FE with a firmware versi...
Thu, 6 Apr, 2023 at 3:15 PM
You can set up the optional 2-factor RFID authentication available on the DL1000V32F and the DL500V32F by following the below instructions : **RFID is avai...
Tue, 28 Feb, 2023 at 2:19 PM
** Before UPDATING YOUR DEVICE, please VERIFY you have backed up your data. ** Please note: the updater will show 3.36, however, dl3/DL3FE screen will s...
Wed, 22 Feb, 2023 at 3:41 PM
*RFID Only available on DL3 FE models starting 01/01/2017 To delete or remove an RFID tag from your DL3FE, please use the following instructions: ...
Tue, 28 Feb, 2023 at 2:20 PM
You may use an External AC Adapter to use with the DataLocker Enterprise drive (DL2). Some older systems cannot provide adequate power through the USB port...
Fri, 31 Mar, 2023 at 2:20 PM